PRODUCTS
Truncated Metering Skid
Keywords:
Cut-off Measuring Skid
Category:
Skid-mounted Equipment
Detailed Introduction
Technical Specifications
Design Pressure: 4.0Mpa
Design temperature: 55℃
Total weight: 58360kg
Length × Width × Height: 19,900 × 5,267 × 5,915 mm
Uses and Operating Principle
It consists of a filter separator along with related natural gas inlet pipelines, sewage outlet pipelines, natural gas outlet pipelines, natural gas metering lines, vent lines, instrument air lines, and skid-mounted base components. The working medium is natural gas. Inside the filter separator on the first-level platform, a coalescing filter element and a vane separator assembly are installed for efficient separation. Natural gas enters the filter separator through the natural gas inlet pipeline and first flows into the gas distribution chamber at the separator's feed end. Here, the gas initially strikes the support tubes holding the filter element, causing larger solid and liquid particles to be partially separated. Under gravity, these heavier particles settle down into the collection cylinder located at the bottom of the container. Next, the gas moves from the outer surface inward, passing through the coalescing filter element. Solid particles are trapped by the filter medium, while liquid droplets, thanks to the medium's coalescing properties, gradually merge and grow on the inner surface of the filter element. Once the droplets reach a certain size, they are dislodged from the inner surface due to the impact of the gas flow, allowing them to fall into the internal flow channels of the filter element and eventually enter the separation chamber. In the separation chamber, the gas undergoes further purification as it passes through the strategically placed vane separator, which effectively captures remaining liquid droplets. This prevents any entrained liquid from being carried out with the gas stream, thereby significantly enhancing the overall separation efficiency.
Meanwhile, the liquid collection cylinder installed at the lower part of the filter separator body effectively prevents gas from escaping through the drain port. Additionally, a magnetic flip-type level gauge—capable of both local and remote monitoring—has been fitted. When the liquid level in the collection cylinder reaches a certain height, operators can manually control the valve on the drain line to initiate the drainage process on-site.
Production Capacity
This factory serves as a modern specialized equipment manufacturing base, with a main building area of 11,400 square meters. The workshop is equipped with advanced heavy-duty lifting systems: a single skid-mounted unit achieves a maximum vertical lifting height of 22 meters, capable of assembling ultra-tall components such as offshore platform modules and large reaction towers. Regarding crane layout, the main lifting zone features a 100-ton heavy-duty crane as the primary configuration. Five single-girder overhead traveling cranes are distributed along the workshop's longitudinal axis, complemented by three semi-gantry cranes covering the entire workflow from welding and final assembly to inspection. The workshop is further equipped with an automated ventilation and dust removal system, an intelligent safety monitoring platform, and multi-dimensional positioning devices, creating a composite industrial space integrating heavy lifting, precision assembly, and safety management.
Exquisite Service
Our after-sales service team prioritizes customer needs, equipped with five specialized service vehicles and five experienced technicians to provide comprehensive support including on-site inspections and resident services. Through a 24/7 response mechanism and regional coverage capabilities, our service team can rapidly deploy to ensure products maintain reliable operation and high safety standards throughout their application lifecycle.
Full-Cycle Operation and Maintenance Support
For precise replacement of critical equipment components or comprehensive system maintenance, we strictly adhere to standardized service procedures, ensuring response times ≤24 hours (negotiable for remote areas based on actual conditions).
Equipped with a team of professional engineers and an original manufacturer spare parts inventory, we deliver end-to-end closed-loop management encompassing fault diagnosis, repair plan formulation, and on-site implementation.
Technical Support and Capacity Building
Provide customized technical training services covering product operation protocols, daily maintenance essentials, and fault prediction methods to help customers enhance equipment management capabilities;
Establish a 24/7 technical support hotline staffed by a team of technical engineers to provide real-time solutions for product application issues, with remote assistance or on-site guidance available upon request.
Quality Assurance
More Products
Container Series
-
Oil-Gas Separation Buffer
Primarily used in crude oil gathering and transportation systems, it buffers pressure and flow fluctuations within the system. By storing and buffering crude oil, it balances supply and demand, thereby stabilizing the production process and ensuring smoother system operation.
-
Gas-liquid Separator
Gas-liquid separators are used to separate liquid droplets (such as water or condensate) or solid particles carried in natural gas from the gas phase. They achieve separation by altering the direction and velocity of the gas flow, utilizing gravitational settling, centrifugal force, or internal components (such as baffles or wire mesh).
-
Three-phase separator
The three-phase separator is a critical piece of equipment capable of simultaneously separating well-produced fluids into gas, oil, and water phases. By carefully controlling the fluid flow rate and residence time within the vessel, as well as leveraging gravity differences and coalescing materials, it enables the oil, gas, and water to naturally stratify—allowing each phase to be separately discharged from the top, middle, and bottom outlets. This device serves as the core component for achieving initial crude oil purification and accurate metering.
-
Vertical Separator
A vertical separator is a vertically installed gas-liquid separator, particularly suited for applications with high gas-to-liquid ratios or limited space. Fluid enters from the middle, with gas flowing upward and exiting through the top outlet, while liquid settles downward and is discharged from the bottom. Its design offers excellent liquid-handling capabilities and more stable liquid-level control, making it commonly used for initial separation after wellheads.
-
Filter Separator
The filter separator is a device used for separating and filtering impurities in liquid or gas media. It is widely applied in industries such as chemical engineering, petroleum, food processing, and pharmaceuticals, effectively removing solid particles, oil droplets, water droplets, and other contaminants to ensure media cleanliness.
Heat Exchanger Series
-
Gas-to-Gas Heat Exchanger
The core function of gas-to-gas heat exchangers is to facilitate efficient heat transfer between two natural gas streams operating at different pressures and temperatures. They are typically employed to utilize high-temperature gas streams (such as flue gas from combustion furnaces) to preheat low-temperature feed gas.
-
Spent Acid Salt-Soluble Heat Exchanger Tube Bundle
Utilizing heat conduction through metal tube walls, this design enables counter-current heat exchange between hot and cold media in the tube/shell side. Its function is to recover process waste heat (e.g., heating crude oil) or cool fluids (e.g., dewaxing), significantly reducing system energy consumption and operating costs.
Skid-mounted Equipment
-
Intelligent Foam Displacement Pump Skid
Equipment features: 3 tanks, 1 pump; Processing capacity: up to 30 L of chemical agent per hour; Design pressure: 35 MPa.
-
Filter Separator Skid
It consists of a filter separator along with related natural gas inlet pipelines, sewage outlet pipelines, natural gas outlet pipelines, venting lines, instrument air lines, and the skid-mounted base, among other components. The working medium is natural gas. Inside the filter separator, there is a coalescing filter element and a vane-type separator assembly for separation purposes.
-
Truncated Metering Skid
It consists of a filter separator along with related natural gas inlet pipelines, sewage outlet pipelines, natural gas outlet pipelines, natural gas metering pipelines, vent pipelines, instrument air pipelines, and skid-mounted base components. The working medium is natural gas.
-
Vortex Separator Skid
The cyclone separator skid utilizes centrifugal force to separate solid particles (such as silt and sand) and liquid droplets (like water and condensate oil) from the gas phase, flinging them toward the vessel walls where they settle and are collected. Its core function is to protect downstream equipment—such as compressors and pipelines—from wear and blockage, while simultaneously enhancing the purity of natural gas or process gas. This ensures the safe and efficient operation of the production system, and the skid-mounted design makes it easy to transport and quickly install on-site.
-
Torch Liquid Separation Tank Skid
This device primarily consists of a horizontal flare knockout drum, process piping, skid-mounted base, electrical control system, and valve assemblies. It efficiently separates gas from liquid, effectively removing any entrained liquids from the flare gas. The separated gas is then routed to the flare module to ensure stable combustion in subsequent processes, while the recovered liquid is pumped under pressure for external transfer, preventing liquid accumulation that could disrupt system operations. Additionally, the system features an integrated skid-mounted design, seamlessly combining separation, pumping, and control components—streamlining installation and enhancing overall reliability.
-
Heating Furnace Skid
A heating furnace skid is a heating device integrated into a skid-mounted module, designed to heat oil, natural gas, or their associated media (such as water or chemical agents). Its function is to raise the fluid temperature—whether by burning fuel or using electric heating—to the process-required level, thereby meeting operational needs like reducing crude oil viscosity, removing water and salt, or preventing natural gas from freezing. Additionally, its modular design makes it easy to transport and install on-site.
-
Integrated Natural Gas Metering and Separation Unit
This device primarily consists of a horizontal gravity separator, process piping, skid-mounted base, electrical control system, and valve assemblies. The entire skid integrates flow measurement with gas-liquid separation: first, the impurity-laden gas from the wellhead is directly measured, and then it passes through a built-in separation unit that removes liquid and solid impurities, enabling integrated measurement and separation in a single operation.
-
Raw gas inlet station separation and buffer skid
This skid-mounted equipment primarily consists of an inlet separator and a fuel gas buffer tank. The remaining auxiliary equipment includes an electric heater (15 kW) and two air-to-gas vaporizers (400 Nm³/h), collectively serving two main functions. The first function is to deliver raw gas from outside the boundary into the inlet separator via the raw gas inlet pipeline, where gas-liquid separation takes place. This process effectively removes solid particles, oil droplets, water droplets, and other impurities from the medium, ensuring its cleanliness.
-
Liquid Supply Skid
The fluid supply skid is a modular, integrated unit designed to store and deliver large volumes of fracturing fluid (base fluid) to high-pressure pump trucks during large-scale operations such as hydraulic fracturing. It typically includes high-capacity storage tanks, mixing equipment, filtration systems, transfer pumps, and a control system, ensuring that the fracturing fluid is delivered continuously, reliably, and precisely when needed. This makes it a critical piece of supporting equipment for the hydraulic end of fracturing operations.
-
Acid Supply Sled
The acid supply skid is a complete system integrating the storage, dilution, blending, pumping, and control of concentrated acid—all mounted on a skid-mounted base. Its function is to continuously, safely, and precisely deliver acid fluids at predetermined concentrations and pressures for enhanced-production operations such as acid fracturing and acidizing. By enabling centralized control and automated operation, it significantly reduces the risk of direct human exposure to hazardous chemicals.
-
Throttle Heating Separation Module
The heater skid primarily consists of the heater body, process piping, skid base, electrical control system, and valve assemblies. The condensate heater features a horizontal cylindrical design with direct heating. The condensate heater comprises an acid gas coil bundle and a shell; inside the heater shell, the heat transfer medium is condensate, which directly heats the sulfur-containing natural gas flowing through the acid gas coils.
-
Skid-mounted automatic chemical dosing skid
It consists of a chemical tank, metering pump, stirrer, level gauge, and control box. It is primarily used for precisely injecting chemical agents into the production process.
Tower Equipment Series
-
Refining and Petrochemical Empty Tower
An “empty tower” typically refers to a distillation or fractionation column within a refining unit that lacks internal packing or trays (such as the core section of atmospheric or vacuum towers), though it contains trays or packing to facilitate vapor-liquid contact.
-
Sewage Stripping Tower Skid
The unit primarily consists of a stripping tower skid, a water-ring compressor skid, and supporting valve assemblies, piping, instrumentation, and electrical controls. The wastewater stripping tower skid is a modular device designed for treating sulfur-containing wastewater, primarily applied in petrochemical, refining, and natural gas processing industries.
-
Zhenhai Refining & Chemical Absorption Tower
Its core function is to selectively capture specific components within a fluid stream (such as natural gas or refinery feedstock) using internally packed adsorbents (e.g., molecular sieves, activated alumina, activated carbon).
Boiler Water Jacket Furnace Series
-
Boiler Installation
In the petroleum industry, boiler installations are primarily used to generate high-temperature, high-pressure steam or hot water. Their function is to provide a reliable source of heat and power for production processes (such as thermal recovery of heavy oil and steam-assisted oil recovery), equipment cleaning, heat tracing and insulation, or driving steam turbines.
-
Water-jacket heating furnace
By burning natural gas or crude oil to generate heat, the thermal medium water in the furnace's water jacket is indirectly heated. This heated thermal medium then transfers its energy to the crude oil or processing medium circulating within the coil. The system's core function is to prevent highly viscous crude oil from solidifying and clogging pipelines and equipment, while ensuring the continued flow of the medium. Additionally, the atmospheric-pressure water jacket design eliminates the risk of direct heating, thereby maintaining the safety and efficiency of the oil and gas gathering and transportation process.
Water Treatment Series
-
Multi-stage Coalescing Filter
The multi-stage coalescing filter employs hydrophilic/oleophobic fiber media to forcibly collide and coalesce micron-sized droplets, enhancing separation efficiency through gravitational settling. This achieves deep separation of oil and water, removing suspended water in oil or residual oil in water to ≤5 ppm levels.
-
Mud Circulation System
The mud circulation system is designed to provide an adequate supply of treated drilling fluid for drilling operations. The drilling fluid circulation system must have sufficient space to handle the fluid both above the suction and balance lines, ensuring that the wellbore remains fully filled with liquid during trips out of the hole.
-
Wastewater Treatment System
Equipment Advantages: Rapid effectiveness, streamlined process, short construction cycle, compact footprint, and strong shock resistance.
Serving our stakeholders (customers)
You can leave us a message, and we will reply within 24 hours!
Address
No. 11 Fenghe Road, Oilfield-Agricultural Integration Industrial Park, Niuzhuang Town, Dongying, Shandong, China
